Booking & payments
ID match verification
Before a customer pays — from a Send to pay link, after signing the order for service and before its deposit when the move is within 72 hours, on every deposit, on a large payment, or on one order you choose — they take photos of their card and ID (and, where you include it for that reason, a short face scan). A virtual card (no physical card) can be verified with a screenshot from the bank or wallet app. They first read your own message (or ours). The names must match and the card in the photos must be the card they pay with. The card number is covered on their own device — only the last 4 digits show.
- 20 min read
- Checked against MoveBoard
- For owners & admins, sales, dispatchers
On this page
ID match verification adds one short step before a payment from a Send to pay link: the person paying takes photos of the card they'll pay with (both sides — covered on their own phone) and of the front of their ID. MoveBoard checks that the name on the card matches the name on the ID and the name they typed, and that the card in the photos is the card they then pay with. Then they pay as usual — and the card is saved on file for the move.
When to ask (one card in Settings)
Settings › Payments & billing › ID match verification — its own page (it used to be a card of Documents & bill of lading › Payments on the bill of lading). Each line is its own switch, set per branch; nothing is asked until you switch something on. Beside each line's switch is its own Include face scan switch.
- Send to pay — before paying from a Send to pay link (below).
- Move within 72 hours — after the customer signs the order for service, before they pay the deposit, when the move's first day (its date and arrival time, on your branch's clock) starts within 72 hours.
- Every deposit — whenever the customer pays a deposit online (the order for service's deposit, any amount).
- Large payments — type an amount: when one online payment is that amount or more, the customer verifies first. Blank = never for this reason. With Every deposit on, it already covers large payments.
- Office turns it on for one order — open the order's Payments window and, on the ID match card under the payments, switch on Required on this order — for example when a customer pays a large amount now. The order's log says who switched it. This line has only its Include face scan switch: it decides the face scan for the orders you switch on.
Allow virtual card screenshots (one per line, beside Include face scan) lets a customer whose card is virtual — no physical card, only in their bank's or wallet's app — upload a screenshot of the card instead of photos of its front and back (below). It is on until you switch it off for a line. When several reasons apply to one payment, screenshots are allowed only if every one of them allows them. Switched off, the customer never sees the choice.
Include face scan (one per line) adds a short face scan after the card and ID photos (below), for that reason. Without it, only the card and ID photos are asked for. When several reasons apply to one payment — for example the move is within 72 hours and it is a large payment — the face scan is asked if any of them includes it. A reason that does not apply to that payment (a $50 deposit under your large-payment amount) doesn't add the face scan.
What the customer reads
Under the lines, Message the customer reads: your own words, up to 400 characters, with the AI sparkle and the microphone like every text box. A preview shows what the customer sees, and Reset to default brings back ours: To protect you and our company from credit card fraud, we confirm that the person paying is the cardholder before we take this payment. It only takes a minute. Under your message MoveBoard adds the steps for that payment by itself: You'll take 4 photos: both sides of your card (the side with the long number first), then the FRONT and BACK of your ID. — or, when the face scan is included, the same with and a quick face scan. The message is kept as plain text (no links or formatting). It shows on the order for service's verification step, on a Send to pay link and on the verification page.
Send to pay
The Send to pay line of the ID match verification page. While it is off, Send to pay works exactly as before.
After signing the order for service, before the payment
Nothing about the ID match shows while the customer reads the order for service: they read and sign it as always. Right after signing — instead of the payment pop-up — the page shows your message and the steps line with Start the ID match. The signature is saved at that moment and stays signed whatever happens next (the move is booked once the deposit is paid). A customer who leaves and comes back lands on this step, not on the document. The verification opens on its own page. On a computer (a laptop or desktop — also one with a touch screen) the page shows a QR code first — Scan with your phone camera to continue. — and the customer takes the photos and the face scan on their phone. The code is your company's short link to a one-time key: it opens this one verification, once, and only for 10 minutes (the computer shows a new code by itself). While the phone works, the computer shows Waiting for your phone…, then Phone connected, Card done ✓, ID done ✓ and Face scan done ✓; when the phone says Done — go back to your computer, the computer has already moved on by itself. Under it, Continue to payment on this phone instead signs the customer in on that phone once (for 30 minutes, only for their own order) and opens the deposit there. Whichever device pays first wins; the other is told This deposit is already paid. Thank you — nothing more was charged. Under the code, Use this computer's camera instead does it all on the computer. Phones and tablets go straight to the steps on their own camera (no code). Verified, the payment pop-up opens by itself and the page says which card pays: the deposit card must be the card they verified (another card is refused before anything is charged, with Verify a different card). 3 tries per order; then the office gets a task.
A virtual card (no physical card)
On the card step the customer sees My card is virtual (no physical card) (only where Allow virtual card screenshots is on for that payment). It changes the step to Upload a screenshot of your card from your bank or wallet app:
- They type the last 4 digits of the card they'll pay with.
- They choose the screenshot — from the photo library on a phone (also on the phone the QR code hands it to), a file on a computer.
- The screenshot is covered on their own device exactly like a card photo: only the last 4 digits, the expiry and the name stay readable — even when the app shows the whole card number, the rest is covered before anything is sent. They see the covered screenshot right away.
- The last 4 on the screenshot must be the ones they typed — the card they'll pay with. If they differ or can't be read, they are told plainly and choose the screenshot again (The card in your screenshot ends in 4242, but the card you'll pay with ends in 1111…). Our check reads them again, and the card they then pay with must be that card, as always.
- A name on the screenshot must match the name on the ID. Many apps show no name — that's fine.
The ID photos and the face scan are asked for exactly as for a physical card. I have a physical card — take photos instead goes back to the card photos. In the office the check says Virtual card: screenshot — in the Payments window, in View, in the printed or emailed copy and in the order's log — with the covered screenshot where the card's front and back would be.
The face scan (when included)
- Consent first — a tick box that says what is taken (a few still pictures of the face, compared by an automated check run for your company), why (to protect against card fraud) and for how long (deleted automatically 1 year after the move date; for long-distance and storage moves, 1 year after the final delivery date). No tick, no scan.
- The scan — the front camera shows the face inside a circle. The customer turns their head slowly — to the side, up, down, around — and a green ring fills as each direction is covered, then they blink once. The face scan gets ready in the background while the card and ID photos are taken, so it usually starts at once; if it is still loading, it says how far it is (Getting the face scan ready… 70%). The face photo kept is a straight-ahead moment of the scan itself, with the whole face in the picture — never the moment before it starts. It follows the face's 3D shape on the customer's own device, so a photo or a screen held up to the camera does not fill the ring. The page says what to fix: no face, someone else in view, too dark, too far or too close.
- The check — a few still frames (never a video) are compared with the photo on the ID. A face that could not be checked at all uses no try, and the office is told.
Camera blocked? The page says how to allow it on an iPhone, Android or a computer, offers to continue on the phone, and gives your phone number. The face scan didn't start? The page says so kindly — This happens sometimes. Tap Try again — it usually starts the second time. — and what helps: close any other app using the camera, and, when the link was opened inside another app (Gmail, Facebook, the Google app), open it in Safari or Chrome. Every time a face scan can't start, MoveBoard records why, so our team can fix it. An older phone (an iPhone before iOS 17, for example) that can't run the face scan is told so before the camera is asked for, and asked to open the page on a newer phone or call you. The office can Mark as verified by hand in the order's Payments window, with a reason — it lets the customer sign and pay — or a Send to pay link on that order be paid — for 7 days, and the order's log says who and why (no card is matched then).
What is kept, and for how long: the face pictures are shown on screen only, to people with See ID match verifications — never emailed, printed or downloaded — except the one face photo in the try's ID match record in the order's attachments (Nov 15), which is made again without it when the face scan is deleted. Every day MoveBoard deletes the face pictures and the face result 1 year after the move date (long-distance and storage: after the final delivery date; a delivery with no date yet waits for it, but never more than 3 years after the scan) and writes Face scan deleted per retention on the order. The card and ID photos follow the rules above.
In the office
The order's Payments window has an ID match card under the payments. Its label shows where the customer stands (Passed, Not passed, Verified by hand, Waiting for the customer — the card is outlined in orange while you wait — or Not required). It also has the Required on this order switch, each check with View (the photos and, on screen, the face scan) and Mark as verified. The (i) on the card explains the switch and shows the message the customer reads. Every try is also filed as one ID match record in the order's Attachments — passed or not, and what happened with the payment (paid, declined, or not continued); the payment it led to shows ID match: Passed — open record.
How the photos are handled
- The card is covered on the payer's own phone before anything is uploaded. The full card number and the security code are never sent to us, and we don't store them.
- Only what card security requires is covered: the card number's digits except the last 4, and the security code — with solid blocks. Everything else stays sharp (the name, a company line, the bank, the expiry), so our check can read the name and you can see which card was used.
- The security code's usual place is blocked even when the phone can't read it — at the right end of the signature strip on the back, and above the number on the right on an American Express front — placed by the card's outline on the photo (and the camera's frame). A photo chosen from the phone whose card outline can't be found is asked again: a security code never leaves the phone.
- The card number must be found on the photo, or the photo isn't used: the customer is asked to take it again (hold the card flat and fill the frame), never sent with the number showing.
- This keeps the card photos in line with card-security (PCI) rules: we don't store full card numbers or security codes.
- Our check reads the covered photos again: if more than the last 4 digits, or a security code, can still be read, the card photos are not kept and the payer is asked to take them again (Part of your card number could still be seen…).
- A virtual card's screenshot is covered the same way on the customer's own device — even when their app shows the whole card number — and kept marked Virtual card: screenshot.
- The ID photos are kept with the payment, as taken.
What the payer sees
- The Send to pay page shows the payment as always — the amount, the tip, the total. Where the card form would be: your message and the steps line (the Send to pay line's own Include face scan decides the face scan) with Start the ID match. On a computer it opens with the same QR code as the order for service's (Scan with your phone camera to continue.); once verified, the card form is back.
- They type their first and last name as on their ID.
- Your card — one photo at a time, like any photo, one instruction per screen, the three photos counted together (Step 2 of 5 · Photo 1 of 3). First Take a photo of the side of your card with the long card number. — with a small drawing of a card, its number's row highlighted, and On many cards the number is on the back. The camera opens full screen: the card fills as much of the camera's picture as it can, so the photo is big and sharp (✕ closes it; Open the camera opens it again). On a phone held upright the camera is drawn for a phone held sideways — the card frame stands tall and every word is turned with it (Turn your phone sideways ↺: top to the left, as the iPhone's Camera app is held, the take-photo button under the right thumb) — so it works the same with the phone's rotation lock on; the photo is turned upright on the phone before it is covered. With rotation lock off, turning the phone shows exactly the same camera — the same big frame, the round take-photo button on the side that is the phone's bottom — so nothing jumps when the phone turns. They fit the card in the frame and tap Take the photo of the number side — it is always on; nothing is read while the camera is open. A blurry photo is said at once, before anything else — This photo is blurry — hold still and try again. A short screen follows — Covering your card number… Nothing has been sent yet. — while their phone covers the card number's digits except the last 4 (and any security code) with solid blocks — the name and everything else stay sharp. Then they see the photo exactly as it will be sent — Your card number is covered. Only the last 4 digits show (•••• 1234). — with Looks good or Retake. Then Photo 2 of 3 — Now take a photo of the other side of your card., covered the same way (its security code and any other numbers), and Looks good — now your ID. - No number on photo 1. If the first photo has no card number on it (the customer photographed the side without it), it stays fully covered and the page says at once: We don't see a card number on this side. Turn your card over and take a photo of the side WITH the long number. — Take the photo again, as photo 1. - Each photo is checked right away — before the next step — for everything that step needs: the last 4 digits on the number side, the name on the card (on one side or the other), and the first and last name on the ID. If something can't be read, there is no way on: the page shows the photo, the reason in plain words — for example We couldn't read the last 4 digits. Hold the card flat in good light and fill the frame. or We couldn't read the last name on your ID… — and only Retake. Glare, blur or a cut-off edge is said first when that is why. These retakes never use one of the customer's tries. Only the covered card photo is sent for this check; the full card number never leaves the phone. - The phone never sends a number side whose last 4 ended up covered: it takes another look made for light print on dark cards (for example small light digits on the back of a dark metal card), and if the last 4 still can't be kept showing, it says so at once and asks for the photo again. There is no typing of digits — the last 4 must be read on the photo. - On a computer or a phone without a live camera, the same button takes or chooses a photo the usual way, and they see the covered result the same.
- Your ID: Photo 3 of 3 — Take a photo of the FRONT of your ID. (full screen, like the card) — Reading your ID… — then We can read the name on your ID. with Looks good or Retake the FRONT. If the first or last name can't be read on the ID, only Retake shows, with the reason. There is no photo of the ID's back. In the office the photos are labelled Card, number side, Card, other side and ID, front (a check from before Nov 15 that has an ID, back still shows it).
- Check the three photos (and the face scan, centred under them) and Send for verification.
- Verified: they continue to the payment. The name is already filled in, they pay with the same card, the page says This card will be saved on file for your move., and the sentence they tick to confirm the payment says it too (This card will be saved on file for this move.) — also when the payer is not the customer
- Not verified: a short, kind note on what to do (take a photo again, type the name as on the ID…) and another try. A try is used only when a complete, readable set of photos is judged and doesn't pass (for example the names don't match); a photo that simply couldn't be read never uses one. After 3 tries that don't pass, the page asks them to contact your office and no payment is taken from the link.
The card they pay with must be the card they verified — the same last 4 digits, expiry, brand and name on the card. Another card is refused before anything is charged: This isn't the card you verified. Please pay with the card ending in 1234, or verify this card first., with Verify a different card to take the photos of the new card. It is checked on the payer's screen before Pay sends anything, and again on our side before the card processor is asked to charge. If the processor's answer still shows another card, that charge is voided at once (nothing is taken), the payer sees the same message, the order log has a line and the office's bell rings.
On the ID step the payer is asked to fit the whole ID in the frame (a passport: the photo page, twice). A photo that is too dark or blurry is caught on the phone right away (This photo is too dark to read…, This photo is blurry — hold still and try again.) so they can take it again; a photo that is not an ID gets We couldn't see your ID in the photo… after the check.
What the office sees
- The bell: ID match verification not passed with the reason — on for owners and admins; anyone can switch it on in Notification settings.
- A task on the order for the admins when the payer has used all 3 tries.
- The order log has a line for every check, passed or not.
- Payments window › Send to pay: every check on the order (Verified or Not passed and why) with View.
- Payment details of a paid payment: its ID match verification, with View.
View opens the verification: the result and time, the payer, the names read from the card and the ID, the card's last 4 digits, and the photos (for a virtual card: Virtual card: screenshot and the covered screenshot instead of the card's two sides). The Download and Print icons are at the top of that view, with Send beside them to email it (for example as proof of payment). The emailed copy has the result and the covered card but not the ID photos: an email's attachments are kept with the order's messages, which more people can open, so the ID photos stay with the payment.
Who can see it
See ID match verifications (Users & permissions › Permissions, in the Payments card). Owners and admins always have it; give it to anyone else who needs to see the photos.
Good to know
- The customer on the order doesn't have to be the payer (Send to pay is often someone else). The verification says whether the ID is the customer's or someone else's.
- The card used to pay is saved on the customer's file for the move, through your card processor, like any card on file. The payer agrees to it in the sentence they tick.
- Photos from checks that did not pass are kept too (nothing that happened is deleted). Like every ID match photo, only people with See ID match verifications can see them; they never appear in the order's Files or the customer's portal, and Send never attaches the ID photos.
Related guides
- SettingsID match verification settingsChoose when customers verify their card and ID before they pay, with or without a face scan, whether a virtual card's screenshot is accepted, and the message they read.
- Booking & paymentsSend to pay — a payment link for someone elseLet an employer, family member or relocation company pay the move from a secure link — from the crew's bill of lading or the closing — with a tip, the card fee and their typed consent.
- Customer portalPaying from a Send to pay linkWhat the person paying for someone else's move sees when they open the link — the bill of lading, the amount, a tip for the crew, the card fee, and the confirmation with their name.
- Booking & paymentsPayments on the bill of ladingHow the crew takes payment at the end of the job — tip, amount, method, signature — and the settings behind it.
Still stuck? A person will help.
Open a ticket from Support inside MoveBoard, or email us — we usually reply within one business day.